Examples of colour anodised finishes. Actual caliper model may vary. See ADDITIONAL INFORMATION tab for the caliper model featured in this particular kit.
Front TAROX Brake Kit – PEUGEOT 309 (VF310C/A) GTi 1.9
2514.00 € ex VAT
Your kit will be manufactured to order with your specification from the options below:
TAROX RoadRace Brake System
Race proven technology and materials applied to road cars for use on the circuit or the road.
Engineered to give improved performance and longevity without sacrificing pedal feel or drivability. Our RoadRace brake systems are equally at home on the track as they are on the road.
TAROX Roadrace brake systems are always tailored to the vehicle, offering owners improved braking across all aspects of driving whilst maintaining a firm usable pedal. TAROX RoadRace brake systems often offer a decrease in crucial un-sprung weight and, very often, due to the slim profile of the calipers, fit inside an OE wheel.
When developing a system we use state-of-the-art live brake ‘mapping’ ECU plug-ins and pedal pressure sensors. With this we can achieve an accurate measurement of a car’s standard performance. These procedures allow us to gather data to ensure real improvements to performance, pedal feel and durability.
TAROX tailors the size and number of pistons for every application individually, maximising the braking performance available from a vehicle’s master cylinder and brake servo without negatively affecting the feel of the brake pedal.
Calipers
All TAROX brake systems feature calipers CNC machined from the highest quality billet alloy and each unit is built and tested by hand at our Italian factory. The two piece design is held together with multiple high tensile steel bolts proven to provide a stiffer overall chassis then mono block calipers. This stiffness translates to a more responsive pedal even with increased levels of braking force. The anodised billet pistons feature internal seals reducing the risk of scorching, eliminating weathering and negating the need for routine servicing.
Calipers can be specified with our standard hard anodised black finish (450 wickers) or from a choice of anodised colours. We currently offer our calipers in black, red, blue, green and gold; all with a beautiful satin finish.
Discs
In most kits, calipers are combined with handed two piece discs with rotors CNC machined from slices of the finest quality European steel billet. These rotors are heat treated, faced, then hand finished, creating a perfectly flat braking surface. The bell of the disc is machined from the same high quality alloy as the calipers and is hard anodised for protection from the elements. Discs can be specified with the following facings:
- F2000 – long curved grooves
- Sport Japan – drilled and grooved
- C83 – short straight grooves
- D95 – drilled only (not recommended for road use)
- ZERO – plain braking surface
Some kits feature a single piece cast disc to produce an economical solution. Check the 'ADDITIONAL INFORMATION' tab for the specification of this particular kit.
❝ These are not an off-the-shelf brake kit. These are tailored brake conversions. ❞
Pads
All TAROX kits come with pre-installed pads and can be specified with either of the following compounds to suit your own individual needs:
Corsa: track compound suitable for fast road
Enduro: track & race use – not suitable for road use
Further details about each compound can be found on our brake pad page.
Hoses
Every big brake kit comes supplied with a pair of braided brake hoses tailored specifically for your car and the TAROX calipers. A teflon coated inner hose is strengthened with a stainless steel braid and then wrapped in a PVC outer coating for protection from the elements.
…and finally
Each kit is supplied with a pair of vehicle specific mounting brackets which are CNC machined from the same light weight billet alloy as the calipers and bells. The brackets are also hard anodised for protection and are accompanied by all of the necessary mounting hardware to allow easy fitment straight out of the box.
Each kit features:
- Hand assembled calipers machined from the highest quality billet alloy.
- Heat treated and CNC machined discs with a choice of facings.
- Pre-installed brake pads.
- Stainless braided & coated brake hoses.
- Vehicle specific CNC machined alloy mounting brackets.
- Hardware kit.
- Printed installation guidelines.
| TAROX Code | |
|---|---|
| Disc Configuration | Two piece |
| Replacement Disc Code | FK0595 |
| Quantity | 1 Kit |
| Axle | Front |
| Vehicle Year | 1987>1993 |
| Variant | GTi 1.9 |
| Caliper Model | B34GT-8 |
| Number of pistons | 8 |
| Disc Dimensions | 330×26 |
| Disc Code | KMRD0595 |
| Replacement pad code | SP0002 |
| Minimum Wheel Size | 18" |
| Make | Model | Variant | Year |
|---|---|---|---|
| PEUGEOT | 309 (VF310C/A) | GTi 1.9 | 1987 - 1993 |
DESPATCH
This website lists our entire range - it is not linked to our stock system. If you would like to check the availability of any items before ordering please call the office or get in touch via the Contact Us page.
Brake kits and Bespoke discs
All brake kits and Bespoke discs are manufactured to order at our facility in Northern Italy. Typically, we require 7-10 days to do this. Certain options, such as colour anodising, may extend the assembly time in some cases. On completion of your build, your order will be shipped to your delivery address. Shipping times vary depending on the destination country.
Brake discs, pads, and fluid
Popular fast moving items are kept in stock and are despatched from TAROX Italy within 1-2 days. Items that are not in stock will need to be manufactured to fulfil your order. We ask that you allow 7-10 days for this.
DELIVERY
All orders are shipped from TAROX Italy using an insured courier service. The courier should send you email updates as your parcel passes through their network to allow you to plan for delivery.
You may also like…
20.00 € ex VAT
Front TAROX Brake Kit – PEUGEOT 309 (VF310C/A) GTi 1.9
1166.00 € ex VAT
Your kit will be manufactured to order with your specification from the options below:
TAROX RoadRace Brake System
Race proven technology and materials applied to road cars for use on the circuit or the road.
Engineered to give improved performance and longevity without sacrificing pedal feel or drivability. Our RoadRace brake systems are equally at home on the track as they are on the road.
TAROX Roadrace brake systems are always tailored to the vehicle, offering owners improved braking across all aspects of driving whilst maintaining a firm usable pedal. TAROX RoadRace brake systems often offer a decrease in crucial un-sprung weight and, very often, due to the slim profile of the calipers, fit inside an OE wheel.
When developing a system we use state-of-the-art live brake ‘mapping’ ECU plug-ins and pedal pressure sensors. With this we can achieve an accurate measurement of a car’s standard performance. These procedures allow us to gather data to ensure real improvements to performance, pedal feel and durability.
TAROX tailors the size and number of pistons for every application individually, maximising the braking performance available from a vehicle’s master cylinder and brake servo without negatively affecting the feel of the brake pedal.
Examples of colour anodised finishes. Actual caliper model may vary. See ADDITIONAL INFORMATION tab for the caliper model featured in this particular kit.
Calipers
All TAROX brake systems feature calipers CNC machined from the highest quality billet alloy and each unit is built and tested by hand at our Italian factory. The two piece design is held together with multiple high tensile steel bolts proven to provide a stiffer overall chassis then mono block calipers. This stiffness translates to a more responsive pedal even with increased levels of braking force. The anodised billet pistons feature internal seals reducing the risk of scorching, eliminating weathering and negating the need for routine servicing.
Calipers can be specified with our standard hard anodised black finish (450 wickers) or from a choice of anodised colours. We currently offer our calipers in black, red, blue, green and gold; all with a beautiful satin finish.
Discs
In most kits, calipers are combined with handed two piece discs with rotors CNC machined from slices of the finest quality European steel billet. These rotors are heat treated, faced, then hand finished, creating a perfectly flat braking surface. The bell of the disc is machined from the same high quality alloy as the calipers and is hard anodised for protection from the elements. Discs can be specified with the following facings:
- F2000 – long curved grooves
- Sport Japan – drilled and grooved
- C83 – short straight grooves
- D95 – drilled only (not recommended for road use)
- ZERO – plain braking surface
Some kits feature a single piece cast disc to produce an economical solution. Check the 'ADDITIONAL INFORMATION' tab for the specification of this particular kit.
❝ These are not an off-the-shelf brake kit. These are tailored brake conversions. ❞
Pads
All TAROX kits come with pre-installed pads and can be specified with either of the following compounds to suit your own individual needs:
Corsa: track compound suitable for fast road
Enduro: track & race use – not suitable for road use
Further details about each compound can be found on our brake pad page.
Hoses
Every big brake kit comes supplied with a pair of braided brake hoses tailored specifically for your car and the TAROX calipers. A teflon coated inner hose is strengthened with a stainless steel braid and then wrapped in a PVC outer coating for protection from the elements.
…and finally
Each kit is supplied with a pair of vehicle specific mounting brackets which are CNC machined from the same light weight billet alloy as the calipers and bells. The brackets are also hard anodised for protection and are accompanied by all of the necessary mounting hardware to allow easy fitment straight out of the box.
Each kit features:
- Hand assembled calipers machined from the highest quality billet alloy.
- Heat treated and CNC machined discs with a choice of facings.
- Pre-installed brake pads.
- Stainless braided & coated brake hoses.
- Vehicle specific CNC machined alloy mounting brackets.
- Hardware kit.
- Printed installation guidelines.
| TAROX Code | |
|---|---|
| Disc Configuration | Single Piece |
| Replacement Disc Code | 1472 |
| Quantity | 1 Kit |
| Axle | Front |
| Vehicle Year | 1987>1993 |
| Variant | GTi 1.9 |
| Caliper Model | B280-6 |
| Number of pistons | 6 |
| Disc Dimensions | 284×26 |
| Disc Code | 1472 |
| Replacement pad code | SP0102 |
| Minimum Wheel Size | 15" |
DESPATCH
This website lists our entire range - it is not linked to our stock system. If you would like to check the availability of any items before ordering please call the office or get in touch via the Contact Us page.
Brake kits and Bespoke discs
All brake kits and Bespoke discs are manufactured to order at our facility in Northern Italy. Typically, we require 7-10 days to do this. Certain options, such as colour anodising, may extend the assembly time in some cases. On completion of your build, your order will be shipped to your delivery address. Shipping times vary depending on the destination country.
Brake discs, pads, and fluid
Popular fast moving items are kept in stock and are despatched from TAROX Italy within 1-2 days. Items that are not in stock will need to be manufactured to fulfil your order. We ask that you allow 7-10 days for this.
DELIVERY
All orders are shipped from TAROX Italy using an insured courier service. The courier should send you email updates as your parcel passes through their network to allow you to plan for delivery.
You may also like…
20.00 € ex VAT
Front TAROX Brake Kit – PEUGEOT 309 (VF310C/A) GTi 1.9
1980.00 € ex VAT
Your kit will be manufactured to order with your specification from the options below:
TAROX RoadRace Brake System
Race proven technology and materials applied to road cars for use on the circuit or the road.
Engineered to give improved performance and longevity without sacrificing pedal feel or drivability. Our RoadRace brake systems are equally at home on the track as they are on the road.
TAROX Roadrace brake systems are always tailored to the vehicle, offering owners improved braking across all aspects of driving whilst maintaining a firm usable pedal. TAROX RoadRace brake systems often offer a decrease in crucial un-sprung weight and, very often, due to the slim profile of the calipers, fit inside an OE wheel.
When developing a system we use state-of-the-art live brake ‘mapping’ ECU plug-ins and pedal pressure sensors. With this we can achieve an accurate measurement of a car’s standard performance. These procedures allow us to gather data to ensure real improvements to performance, pedal feel and durability.
TAROX tailors the size and number of pistons for every application individually, maximising the braking performance available from a vehicle’s master cylinder and brake servo without negatively affecting the feel of the brake pedal.
Examples of colour anodised finishes. Actual caliper model may vary. See ADDITIONAL INFORMATION tab for the caliper model featured in this particular kit.
Calipers
All TAROX brake systems feature calipers CNC machined from the highest quality billet alloy and each unit is built and tested by hand at our Italian factory. The two piece design is held together with multiple high tensile steel bolts proven to provide a stiffer overall chassis then mono block calipers. This stiffness translates to a more responsive pedal even with increased levels of braking force. The anodised billet pistons feature internal seals reducing the risk of scorching, eliminating weathering and negating the need for routine servicing.
Calipers can be specified with our standard hard anodised black finish (450 wickers) or from a choice of anodised colours. We currently offer our calipers in black, red, blue, green and gold; all with a beautiful satin finish.
Discs
In most kits, calipers are combined with handed two piece discs with rotors CNC machined from slices of the finest quality European steel billet. These rotors are heat treated, faced, then hand finished, creating a perfectly flat braking surface. The bell of the disc is machined from the same high quality alloy as the calipers and is hard anodised for protection from the elements. Discs can be specified with the following facings:
- F2000 – long curved grooves
- Sport Japan – drilled and grooved
- C83 – short straight grooves
- D95 – drilled only (not recommended for road use)
- ZERO – plain braking surface
Some kits feature a single piece cast disc to produce an economical solution. Check the 'ADDITIONAL INFORMATION' tab for the specification of this particular kit.
❝ These are not an off-the-shelf brake kit. These are tailored brake conversions. ❞
Pads
All TAROX kits come with pre-installed pads and can be specified with either of the following compounds to suit your own individual needs:
Corsa: track compound suitable for fast road
Enduro: track & race use – not suitable for road use
Further details about each compound can be found on our brake pad page.
Hoses
Every big brake kit comes supplied with a pair of braided brake hoses tailored specifically for your car and the TAROX calipers. A teflon coated inner hose is strengthened with a stainless steel braid and then wrapped in a PVC outer coating for protection from the elements.
…and finally
Each kit is supplied with a pair of vehicle specific mounting brackets which are CNC machined from the same light weight billet alloy as the calipers and bells. The brackets are also hard anodised for protection and are accompanied by all of the necessary mounting hardware to allow easy fitment straight out of the box.
Each kit features:
- Hand assembled calipers machined from the highest quality billet alloy.
- Heat treated and CNC machined discs with a choice of facings.
- Pre-installed brake pads.
- Stainless braided & coated brake hoses.
- Vehicle specific CNC machined alloy mounting brackets.
- Hardware kit.
- Printed installation guidelines.
| TAROX Code | |
|---|---|
| Disc Configuration | Two piece |
| Replacement Disc Code | FK0360 |
| Quantity | 1 Kit |
| Axle | Front |
| Vehicle Year | 1987>1993 |
| Variant | GTi 1.9 |
| Caliper Model | B32-6 |
| Number of pistons | 6 |
| Disc Dimensions | 318×26 |
| Disc Code | KMRD0360 |
| Replacement pad code | SP0002 |
| Minimum Wheel Size | 17" |
DESPATCH
This website lists our entire range - it is not linked to our stock system. If you would like to check the availability of any items before ordering please call the office or get in touch via the Contact Us page.
Brake kits and Bespoke discs
All brake kits and Bespoke discs are manufactured to order at our facility in Northern Italy. Typically, we require 7-10 days to do this. Certain options, such as colour anodising, may extend the assembly time in some cases. On completion of your build, your order will be shipped to your delivery address. Shipping times vary depending on the destination country.
Brake discs, pads, and fluid
Popular fast moving items are kept in stock and are despatched from TAROX Italy within 1-2 days. Items that are not in stock will need to be manufactured to fulfil your order. We ask that you allow 7-10 days for this.
DELIVERY
All orders are shipped from TAROX Italy using an insured courier service. The courier should send you email updates as your parcel passes through their network to allow you to plan for delivery.
You may also like…
20.00 € ex VAT
Front TAROX Brake Kit – PEUGEOT 309 (VF310C/A) GTi 1.9
2034.00 € ex VAT
Your kit will be manufactured to order with your specification from the options below:
TAROX RoadRace Brake System
Race proven technology and materials applied to road cars for use on the circuit or the road.
Engineered to give improved performance and longevity without sacrificing pedal feel or drivability. Our RoadRace brake systems are equally at home on the track as they are on the road.
TAROX Roadrace brake systems are always tailored to the vehicle, offering owners improved braking across all aspects of driving whilst maintaining a firm usable pedal. TAROX RoadRace brake systems often offer a decrease in crucial un-sprung weight and, very often, due to the slim profile of the calipers, fit inside an OE wheel.
When developing a system we use state-of-the-art live brake ‘mapping’ ECU plug-ins and pedal pressure sensors. With this we can achieve an accurate measurement of a car’s standard performance. These procedures allow us to gather data to ensure real improvements to performance, pedal feel and durability.
TAROX tailors the size and number of pistons for every application individually, maximising the braking performance available from a vehicle’s master cylinder and brake servo without negatively affecting the feel of the brake pedal.
Examples of colour anodised finishes. Actual caliper model may vary. See ADDITIONAL INFORMATION tab for the caliper model featured in this particular kit.
Calipers
All TAROX brake systems feature calipers CNC machined from the highest quality billet alloy and each unit is built and tested by hand at our Italian factory. The two piece design is held together with multiple high tensile steel bolts proven to provide a stiffer overall chassis then mono block calipers. This stiffness translates to a more responsive pedal even with increased levels of braking force. The anodised billet pistons feature internal seals reducing the risk of scorching, eliminating weathering and negating the need for routine servicing.
Calipers can be specified with our standard hard anodised black finish (450 wickers) or from a choice of anodised colours. We currently offer our calipers in black, red, blue, green and gold; all with a beautiful satin finish.
Discs
In most kits, calipers are combined with handed two piece discs with rotors CNC machined from slices of the finest quality European steel billet. These rotors are heat treated, faced, then hand finished, creating a perfectly flat braking surface. The bell of the disc is machined from the same high quality alloy as the calipers and is hard anodised for protection from the elements. Discs can be specified with the following facings:
- F2000 – long curved grooves
- Sport Japan – drilled and grooved
- C83 – short straight grooves
- D95 – drilled only (not recommended for road use)
- ZERO – plain braking surface
Some kits feature a single piece cast disc to produce an economical solution. Check the 'ADDITIONAL INFORMATION' tab for the specification of this particular kit.
❝ These are not an off-the-shelf brake kit. These are tailored brake conversions. ❞
Pads
All TAROX kits come with pre-installed pads and can be specified with either of the following compounds to suit your own individual needs:
Corsa: track compound suitable for fast road
Enduro: track & race use – not suitable for road use
Further details about each compound can be found on our brake pad page.
Hoses
Every big brake kit comes supplied with a pair of braided brake hoses tailored specifically for your car and the TAROX calipers. A teflon coated inner hose is strengthened with a stainless steel braid and then wrapped in a PVC outer coating for protection from the elements.
…and finally
Each kit is supplied with a pair of vehicle specific mounting brackets which are CNC machined from the same light weight billet alloy as the calipers and bells. The brackets are also hard anodised for protection and are accompanied by all of the necessary mounting hardware to allow easy fitment straight out of the box.
Each kit features:
- Hand assembled calipers machined from the highest quality billet alloy.
- Heat treated and CNC machined discs with a choice of facings.
- Pre-installed brake pads.
- Stainless braided & coated brake hoses.
- Vehicle specific CNC machined alloy mounting brackets.
- Hardware kit.
- Printed installation guidelines.
| TAROX Code | |
|---|---|
| Disc Configuration | Two piece |
| Replacement Disc Code | Fk0359 |
| Quantity | 1 Kit |
| Axle | Front |
| Vehicle Year | 1987>1993 |
| Variant | GTi 1.9 |
| Caliper Model | B32-6 |
| Number of pistons | 6 |
| Disc Dimensions | 330×26 |
| Disc Code | KMRD0359 |
| Replacement pad code | SP0002 |
| Minimum Wheel Size | 17" |
DESPATCH
This website lists our entire range - it is not linked to our stock system. If you would like to check the availability of any items before ordering please call the office or get in touch via the Contact Us page.
Brake kits and Bespoke discs
All brake kits and Bespoke discs are manufactured to order at our facility in Northern Italy. Typically, we require 7-10 days to do this. Certain options, such as colour anodising, may extend the assembly time in some cases. On completion of your build, your order will be shipped to your delivery address. Shipping times vary depending on the destination country.
Brake discs, pads, and fluid
Popular fast moving items are kept in stock and are despatched from TAROX Italy within 1-2 days. Items that are not in stock will need to be manufactured to fulfil your order. We ask that you allow 7-10 days for this.
DELIVERY
All orders are shipped from TAROX Italy using an insured courier service. The courier should send you email updates as your parcel passes through their network to allow you to plan for delivery.
You may also like…
20.00 € ex VAT
Front TAROX Brake Kit – PEUGEOT 309 (VF310C/A) GTi 1.9
1890.00 € ex VAT
Your kit will be manufactured to order with your specification from the options below:
TAROX RoadRace Brake System
Race proven technology and materials applied to road cars for use on the circuit or the road.
Engineered to give improved performance and longevity without sacrificing pedal feel or drivability. Our RoadRace brake systems are equally at home on the track as they are on the road.
TAROX Roadrace brake systems are always tailored to the vehicle, offering owners improved braking across all aspects of driving whilst maintaining a firm usable pedal. TAROX RoadRace brake systems often offer a decrease in crucial un-sprung weight and, very often, due to the slim profile of the calipers, fit inside an OE wheel.
When developing a system we use state-of-the-art live brake ‘mapping’ ECU plug-ins and pedal pressure sensors. With this we can achieve an accurate measurement of a car’s standard performance. These procedures allow us to gather data to ensure real improvements to performance, pedal feel and durability.
TAROX tailors the size and number of pistons for every application individually, maximising the braking performance available from a vehicle’s master cylinder and brake servo without negatively affecting the feel of the brake pedal.
Examples of colour anodised finishes. Actual caliper model may vary. See ADDITIONAL INFORMATION tab for the caliper model featured in this particular kit.
Calipers
All TAROX brake systems feature calipers CNC machined from the highest quality billet alloy and each unit is built and tested by hand at our Italian factory. The two piece design is held together with multiple high tensile steel bolts proven to provide a stiffer overall chassis then mono block calipers. This stiffness translates to a more responsive pedal even with increased levels of braking force. The anodised billet pistons feature internal seals reducing the risk of scorching, eliminating weathering and negating the need for routine servicing.
Calipers can be specified with our standard hard anodised black finish (450 wickers) or from a choice of anodised colours. We currently offer our calipers in black, red, blue, green and gold; all with a beautiful satin finish.
Discs
In most kits, calipers are combined with handed two piece discs with rotors CNC machined from slices of the finest quality European steel billet. These rotors are heat treated, faced, then hand finished, creating a perfectly flat braking surface. The bell of the disc is machined from the same high quality alloy as the calipers and is hard anodised for protection from the elements. Discs can be specified with the following facings:
- F2000 – long curved grooves
- Sport Japan – drilled and grooved
- C83 – short straight grooves
- D95 – drilled only (not recommended for road use)
- ZERO – plain braking surface
Some kits feature a single piece cast disc to produce an economical solution. Check the 'ADDITIONAL INFORMATION' tab for the specification of this particular kit.
❝ These are not an off-the-shelf brake kit. These are tailored brake conversions. ❞
Pads
All TAROX kits come with pre-installed pads and can be specified with either of the following compounds to suit your own individual needs:
Corsa: track compound suitable for fast road
Enduro: track & race use – not suitable for road use
Further details about each compound can be found on our brake pad page.
Hoses
Every big brake kit comes supplied with a pair of braided brake hoses tailored specifically for your car and the TAROX calipers. A teflon coated inner hose is strengthened with a stainless steel braid and then wrapped in a PVC outer coating for protection from the elements.
…and finally
Each kit is supplied with a pair of vehicle specific mounting brackets which are CNC machined from the same light weight billet alloy as the calipers and bells. The brackets are also hard anodised for protection and are accompanied by all of the necessary mounting hardware to allow easy fitment straight out of the box.
Each kit features:
- Hand assembled calipers machined from the highest quality billet alloy.
- Heat treated and CNC machined discs with a choice of facings.
- Pre-installed brake pads.
- Stainless braided & coated brake hoses.
- Vehicle specific CNC machined alloy mounting brackets.
- Hardware kit.
- Printed installation guidelines.
| TAROX Code | |
|---|---|
| Disc Configuration | Two piece |
| Replacement Disc Code | FK0226 |
| Quantity | 1 Kit |
| Axle | Front |
| Vehicle Year | 1987>1993 |
| Variant | GTi 1.9 |
| Caliper Model | B32-6 |
| Number of pistons | 6 |
| Disc Dimensions | 305×26 |
| Disc Code | KMRD0226 |
| Replacement pad code | SP0002 |
| Minimum Wheel Size | 16" |
DESPATCH
This website lists our entire range - it is not linked to our stock system. If you would like to check the availability of any items before ordering please call the office or get in touch via the Contact Us page.
Brake kits and Bespoke discs
All brake kits and Bespoke discs are manufactured to order at our facility in Northern Italy. Typically, we require 7-10 days to do this. Certain options, such as colour anodising, may extend the assembly time in some cases. On completion of your build, your order will be shipped to your delivery address. Shipping times vary depending on the destination country.
Brake discs, pads, and fluid
Popular fast moving items are kept in stock and are despatched from TAROX Italy within 1-2 days. Items that are not in stock will need to be manufactured to fulfil your order. We ask that you allow 7-10 days for this.
DELIVERY
All orders are shipped from TAROX Italy using an insured courier service. The courier should send you email updates as your parcel passes through their network to allow you to plan for delivery.
You may also like…
20.00 € ex VAT